 |
 |
 |
 |
 |
Singles - $1400
Frame,boom, seat cover, handlebars, steering linkage,kingpins ,chainpulley,powdercoating. all other components needed are standard bicycle components.
- 1"od "T" on top of frt der mast for light/monitor mounts
- three h2o's-one under seat on main tube, two on boom socket in frt of cross arm-one above and one below
- flag mount on top of seat rail (r.h. for Eng, l.h. for american)
- threaded mounts on top of both seat rails for lights/ect.
- rack loop and rear fender/rack mounts
- stops and fiitngs for rear der and Sram internal
- Seat rails/boom length set by body measurements.
 |
Racer
- 4130 cromoly frame with 7005 aluminum boom . configured as a 19 x 16 wheel or 20x20 wheeled,
- choice of any seat angle from 19 to 55 degrees.
 |
SportRacer - similar to the GREENSPEED glr,700mm track
- 4130 cromoly frame with 7005 aluminum boom . configured as a 19 x 16 wheel or 20x20 wheeled,
- choice of any seat angle from 19 to 55 degrees.
 |
Sport Touring & Touring - longer, heavier build for general riding and moderate touring 800mm track
- 4130 cromoly frame with 7005 aluminum boom (Steel boom on Touring).
- configured as a 20x20 wheeled, choice of any seat angle from 25 to 55 degrees.
Complete component packages available starting a $650. Sram internal, DaVinci drives(for tandem), Rohloff internals, and Schlumph cranksets are available.
On the order form you get to give me body measurements, prefered seat angle, type of trike, ect. You can print it out and send it via usps, you can print it out, fill it in and then scan it back in, or(probably simpler) tye the info into an e-mail.
